Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Liner & Rebuild for Fairfax Homeowners
If you’re wondering how much Chimney Liner & Rebuild costs, work in Fairfax, VA typically runs between $2,800 and $9,500 depending on what the camera finds, and most jobs are completed within one to three days once materials arrive. We’re Level Two Chimney Fairfax, led by Corrine Halstead, and we’ve inspected over 38,000 chimneys since 2009, every one documented with a written price before any work started. If your liner is cracked, your flue is spalling, or your chimney crown has failed, call (571) 443-8256 for a camera-scan inspection and a written quote.
What we won’t do is tell you the chimney needs a rebuild without showing you exactly why on camera. Clause 4 of the Haven Standard requires a photo record on every job, and that record becomes yours. That’s how we’ve operated since 2009, years before insurers or code officials started asking for it. If you’re researching before you call anyone, you’re our kind of customer.
What Our Chimney Liner & Rebuild Service Includes
Stainless Steel Liner
A stainless steel liner is a rigid or flexible metal tube installed inside your existing flue to contain heat and combustion gases. In Fairfax, we commonly install stainless liners when the original clay tile liner has cracked, shifted, or separated at the mortar joints, which a camera scan shows as daylight between tiles. Learn more about our Chimney Liner & Rebuild in Fairfax. We use liners from Olympia Chimney and DuraFlex, sized to your flue dimensions and appliance type, with a written warranty included before the first tool comes off the truck.
Flexible Liner
A flexible liner is the same stainless steel protection but built to snake down flues with offsets, bends, or irregular masonry, common in Fairfax homes built before the 1980s. We also offer our Chimney Liner & Rebuild in Vienna for nearby homeowners with similar flue conditions. It’s often the right call when the existing flue is structurally sound but the tiles inside have failed, and replacing them from above would mean cutting open the chase. We’ll show you the camera footage of the bends so you understand why flexible beats rigid in your specific flue, then quote the job in writing.
Liner Replacement
Liner replacement means removing the old, damaged liner, whether it’s clay tile, cast-in-place, or a previous metal liner that’s deteriorated, and installing a new one sized to your current appliance. In many older Fairfax neighborhoods like Mosby Woods and Country Club Hills, we find liners installed for oil furnaces that now vent a gas system, and the chemistry simply doesn’t match. The fix starts with a Level 2 camera inspection to see what’s actually in there, then a written scope that spells out what comes out and what goes in.
Partial Rebuild
A partial rebuild addresses the upper portion of the chimney, typically the top 10 to 20 courses of brick, the crown, and the flue liner above the roofline. Fairfax winters with freeze-thaw cycles work water into brick faces, and we regularly see spalled bricks and failed mortar joints from the flashing up. We also handle Chimney Liner & Rebuild - Chantilly for homeowners facing the same weather-related damage. We rebuild that section with new masonry, a proper concrete crown with a drip edge, and a flue termination that sheds water, then document every stage with photos.
Full Chimney Rebuild
A full rebuild means taking the chimney down to the roofline or the firebox and rebuilding it as new masonry, liner, crown, and cap. We recommend it when the structural brick itself has failed, not just the liner, which happens in Fairfax when decades of water intrusion have turned mortar to sand. This is the most invasive option and the one we never recommend without a written report showing why smaller fixes won’t hold. Corrine Halstead reviews every full rebuild recommendation personally.
Liner Repair
Liner repair is the middle ground between replacing the entire liner and leaving a problem to get worse, used when damage is localized rather than systemic. Products like HeatShield allow us to resurface cracked clay tile liners in place, particularly in the smoke chamber area where heat stress concentrates. If the damage is limited to a defined area and the rest of the flue is structurally intact, liner repair can save thousands over replacement, and we’ll tell you plainly when that’s the case.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Liner & Rebuild
We work primarily with Olympia Chimney and DuraFlex liners because both hold up to the moisture and temperature swings Fairfax sees every year, and both have serviceable parts we can get quickly. For rebuild masonry we use Famco dampers and Copperfield chimney caps and chase covers, specifying the right gauge and material for the job rather than whatever is on the truck. If you have a mason quoting brick work and a sweep quoting a liner, we do both under one crew and one written price.
Whether you have an existing liner from a brand we haven’t mentioned or a chimney that’s never had a liner at all, we can help. The camera doesn’t care what brand name is on the existing components. It shows us what failed, why, and what needs to change.
BeforeAfterSigns You Need Chimney Liner & Rebuild Right Now
- You see flaking brick or mortar dust at the base of the fireplace. Spalled brick faces and crumbling mortar joints mean water has penetrated the masonry, and the freeze-thaw cycle in Fairfax winters is doing structural damage. The bricks don’t reseal themselves; it gets worse every season.
- You smell a campfire or damp, smoky odor in the room even when you haven’t burned in weeks. A cracked or deteriorated liner lets combustion gases and creosote odors leak into the home instead of exhausting up the flue. That’s a carbon monoxide path, not a nuisance smell.
- You found tile chips or flat clay pieces on the roof or in the firebox. When the clay tile liner inside the flue starts to break apart, pieces fall into the smoke shelf or down into the firebox. Any visible tile debris means the liner has failed somewhere above.
- Your chimney leans, has visible cracks, or you can see gaps in the mortar joints from the ground. A leaning chimney is a structural failure, not a cosmetic one, and it often starts with a failed crown letting water into the brick. The rebuild has to address the water entry point, not just the visible crack.
- Your heating appliance was changed from oil or wood to gas, and the liner was never touched. A liner sized for an oil furnace carries different flue gases at different temperatures than a gas insert or furnace. If the previous owner switched fuels and nobody relined, you’re venting through a flue not engineered for what’s connected to it.
Our Chimney Liner & Rebuild Process - Step by Step
- 1
Camera-scan inspection and written report. We run a camera from the firebox or cleanout up through the full flue length, recording as we go. You see the footage before we leave, and you get a written report with photos showing exactly what failed, where, and what it means.
- 2
Written price and written scope. Before any work starts, you receive a written price, a written scope of what gets done, and a written warranty for the work. If the rebuild scope changes during demolition because we find something the camera couldn’t see, we stop and bring you a revised written price before proceeding.
- 3
Protection and demolition. We seal the fireplace opening, cover floors, and set up dust control before taking down any masonry. For partial and full rebuilds, we work top-down, protecting the roof and gutters while removing brick and old liner material.
- 4
Liner installation and masonry rebuild. The new liner goes in and gets connected to the appliance, then the masonry work is rebuilt using materials sized to the original chimney profile. Crown, cap, and flashing integration happen as part of the same job, not as a surprise add-on.
- 5
Final camera scan and documented photo record. After the work is complete, we run the camera again and hand you a documented photo record of the finished job. This is Haven Standard Clause 4, and it’s been our practice on every job since 2009. Your rebuild is backed by the 365-Day Done Right Promise.
How Much Does Chimney Liner & Rebuild Cost in Fairfax?
A stainless steel liner replacement in Fairfax typically runs $2,800 to $4,800, depending on flue length, liner diameter, and whether the chimney is straight or offset. HeatShield liner repair, where the existing clay tile can be resurfaced, typically runs $1,600 to $2,400. A partial rebuild with new crown and top courses runs $3,500 to $6,000, and a full chimney rebuild from the roofline up runs $7,000 to $9,500 or more if the firebox needs work too. These are real numbers from Fairfax jobs, not national averages.
What affects the price is flue height, roof pitch, accessibility, whether the old liner comes out in one piece or fights you, and whether the existing crown and flashing can be reused. What should not affect the price is a technician standing in your living room deciding what to charge. That’s why Haven Standard Clause 1 requires a written price before work starts, always. Your estimate includes the camera inspection, the written scope, and the warranty. Bring us a competitor’s written quote and we’ll give you a free second opinion on it.
Chimney Liner & Rebuild Near Fairfax - Our Service Area
We serve Chimney Liner & Rebuild in Fairfax and the surrounding Northern Virginia communities: Vienna, Tysons Corner, Reston, Falls Church, Springfield, Chantilly, McLean, Herndon, Arlington, Alexandria, and Sterling. Most inspections are scheduled within a week, and we send a text with the named technician before we arrive. If you’re in Chimney Liner & Rebuild in Vienna or Chimney Liner & Rebuild in Tysons Corner, the same written-price process applies.
Serving Fairfax, VA - Our Local Coverage Area
We’re based in the Fairfax area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Liner & Rebuild in Fairfax
Chimney liner and rebuild is the process of replacing or repairing the flue liner inside your chimney and rebuilding any portion of the masonry that has failed. The liner is the barrier that keeps heat, creosote, and combustion gases inside the flue and moving up and out. When it cracks, shifts, or breaks apart, the chimney isn’t safe to use until the liner is repaired or replaced, and any structural brick damage is addressed at the same time.
A liner replacement with no masonry work is typically done in one day. A partial rebuild takes two to three days. A full chimney rebuild runs three to five days depending on height, access, and weather. We’ll give you a written schedule in the scope before work starts, and if the schedule changes, you’ll know why.
Liner work in Fairfax runs $1,600 to $4,800 depending on whether the existing liner can be resurfaced or must be replaced, and rebuild work runs $3,500 to $9,500 depending on how much of the chimney has to come down. Every quote comes in writing before work starts, with the scope and warranty spelled out. Call (571) 443-8256 for a free camera-scan estimate and an exact number for your chimney.
Yes, we install and service both Olympia Chimney and DuraFlex liners, and we stock the components needed for common Fairfax installations. The brand of your existing liner matters less than the condition it’s in, and the camera will show us that in the first 20 minutes. We’ll quote the liner that fits your flue and appliance, not whatever we have left on the shelf.
If you see smoke leaking into the room, smell gas, or have visible tile debris falling into your firebox, stop using the fireplace and call us. Our phones are answered by a live person 24/7, and we’ll schedule the camera inspection as quickly as possible. A failed liner is a carbon monoxide path, not something to monitor through the winter.
Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. The specific liner and masonry materials have their own manufacturer warranties, and both are documented in the written warranty we give you before work starts. Your photo record and written scope are your documentation if anything ever needs to be revisited.
Clear the area around the fireplace so we have three to four feet of working room, and move anything fragile off the mantel. We seal the fireplace opening and cover floors before starting, but it helps if you remove small items from the hearth. The camera inspection is clean and quick, but the rebuild itself is real construction work, so plan for a day or three of a work crew on site.
Schedule Your Chimney Liner & Rebuild Service in Fairfax Today
Call (571) 443-8256 and we’ll schedule a camera-scan inspection, give you a written price before any work starts, and show you exactly what your chimney needs and what it doesn’t. Corrine Halstead and the Level Two Chimney Fairfax team have been doing this work since 2009 with one rule: prove it on camera, price it in writing, and stand behind it. No obligation, no pressure, no mystery.
Written by Corrine Halstead, Owner at Level Two Chimney Fairfax, serving Fairfax since 2009.