Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Fairfax: What to Know First
We service Olympia Chimney fireplaces and inserts across Fairfax, and the honest answer on timing is this: most Olympia-specific fireplace repairs are completed in one visit, parts permitting. Common jobs like damper repair, gas log service, and firebox repointing usually run $185 to $640, while insert conversions and liner retrofits land higher depending on what the camera shows. Every job gets a written price before work starts, and that price does not move at the door. If you own an Olympia fireplace or insert in Fairfax and something’s off, call (571) 443-8256 and tell us what you’re seeing. We’ll tell you whether it can wait.
As an independent Olympia Chimney service provider, we’re not affiliated with or authorized by the manufacturer. What we are is a Fairfax chimney company that has inspected and cleaned more than 38,000 chimneys since 2009, with a camera on every single one. Corrine Halstead runs our Fairfax crew, and she’s been behind the camera long enough to know that the flue tells the truth even when the homeowner’s memory doesn’t. This page is for Fairfax homeowners who want to know what’s actually inside their Olympia fireplace before anyone touches it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia makes solid mid-market fireplace components, but every brand has patterns. Here’s what we see on Olympia units in Fairfax:
- Cast-iron damper plate warping on the Olympia zero-clearance line. These dampers sit close to the firebox opening and take direct heat every burn. After five to ten years of Northern Virginia winters, the plate bows enough that it won’t seat, even when the handle feels fine. We replace the plate and adjust the linkage rather than quoting a whole new damper assembly, which saves you about $200 on the typical Fairfax repair.
- Slow-close gasket degradation on Olympia glass doors. The fiberglass rope gasket on Olympia fireplace doors compresses and flakes after repeated heat cycling. The tell is a haze on the glass right at the edge, where air is getting pulled in and cooling the burn. We replace the gasket with an OEM-equivalent material and re-seat the glass. It’s a $140 to $220 fix that also cuts the creosote load, because a tight door burns cleaner.
- Refractory panel cracking in Olympia masonry-style fireboxes. The panels are refractory concrete, and they’re good for roughly eight to twelve years of regular use before micro-cracks from thermal expansion become visible cracks you can put a fingernail in. Left alone, heat reaches the steel shell behind the panel and warps it. We replace panels in matched sets, not singles, because a mismatched panel set shifts the firebox geometry and shortens the life of the new panel.
- Log-set positioning wear on Olympia vented gas fireplaces. The ceramic logs themselves rarely fail. What fails is the stacking rig: the pins and brackets that hold the top logs in the intended flame pattern loosen over time, and the flame starts licking the thermocouple or the glass. Owners sometimes mistake this for a gas pressure problem. It’s usually a $95 repositioning and pin replacement, not a gas valve.
- Chimney chase flashing leaks on Fairfax homes with Olympia prefab installations. This one’s less about Olympia and more about Fairfax humidity plus freeze-thaw cycles, but Olympia prefab chases show it earlier because the chase top is a larger flat surface than a masonry crown. Water gets in, and the first thing it reaches is the firebox below. We re-flash the chase and replace the chase cover if it’s rusted through, and we document the interior with photos before and after.
Our Olympia Chimney Fireplace Services Process
Every Olympia job in Fairfax follows the same sequence, and nothing about it changes at the door:
- 1
The call. A live person answers, 24/7. We ask what you’re seeing or hearing, and we book a window. You’ll get a text when the tech is on the way, and the tech’s name is on the work order before they arrive.
- 2
The camera inspection. We run a camera down the flue and across the firebox before touching anything. This is NFPA 211 Level 2, and it’s included on every visit. We photo-document what we find: damper position, panel condition, gasket wear, log set alignment, chase interior.
- 3
The written price. You get a written scope, written price, and written warranty before any work starts. If the part is an Olympia OEM piece, we say so. If an aftermarket part from our supply network makes more sense, we say that too, with the trade-off spelled out in plain language.
- 4
The repair. We do the work we quoted. No upselling, no “while we’re in there” additions unless you approve a written change first.
- 5
The test and the photo record. We run the fireplace through a full burn or gas cycle, confirm the damper operation, and re-camera where needed. You walk away with photos of the completed work and the interior after repair.
- 6
The follow-through. Every Fairfax Olympia job is backed by the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s stamped on the paperwork under Clause 1 of the Haven Standard: written price, written scope, written warranty, before work starts.
BeforeAfterWhat Olympia Chimney Fireplace Services Costs in Fairfax
Here’s what Fairfax homeowners can expect to pay for common Olympia fireplace work, based on what we’ve billed across the county:
- Gas fireplace service (log set reposition, thermocouple check, glass seal, ember bed refresh): $185 to $385
- Damper repair (plate replacement, linkage adjustment on Olympia zero-clearance units): $210 to $460
- Firebox repointing and refractory panel replacement: $340 to $900 depending on panel count and firebox size
- Glass door gasket replacement with re-seating: $140 to $220
- Fireplace conversion (wood to gas or gas to wood with log set and gas line work): $850 to $2,400 depending on gas line routing and chase condition
- Full liner replacement with Olympia-compatible stainless from our DuraFlex inventory: $1,800 to $4,200 depending on flue height and chase access
What moves the price is access. A first-floor firebox with a straight flue is a different job than a third-floor chase with a steep roof pitch in Fairfax’s older colonial stock. The camera settles it. Call (571) 443-8256 and we’ll give you a written estimate, not a guess over the phone.
Why Fairfax Homeowners Call Level Two Chimney Fairfax for Olympia Chimney Work
The camera tells you what the chimney is; the written quote tells you what the fix costs. Everything else is just conversation. Corrine Halstead learned the trade at Apex Technical School in Long Island City and brought her camera-first approach to Fairfax years ago. She and her crew have serviced chimneys across the county, including older colonials near the Fairfax County Government Center corridor where flue deterioration tends to run a generation ahead of the inspection schedule.
We made camera-scan documentation the default on every visit back in 2009, and we haven’t skipped one since. Clause 4 of the Haven Standard requires a photo record on every job. When an Olympia part is discontinued or backordered, we source through our supply network, which stocks DuraFlex, HeatShield, and Gelco materials alongside Olympia components, so you’re not waiting six weeks for a gasket. Background-checked, uniformed technicians. A live person on the phone, day or night. A written price before anyone starts. And a promise that stands for a full year. That’s the whole pitch.
FAQs
No. Using an independent service provider does not void your Olympia warranty in the U.S. under the Magnuson-Moss Warranty Act, as long as the work is performed correctly and parts meet or exceed OEM spec. We document every repair with photos and a written record, which actually helps if you ever need to make a warranty claim. Call (571) 443-8256 and we’ll walk you through what your specific serial number is covered for.
Most Olympia repairs we do in Fairfax are completed in one visit. Damper plate replacements, gasket work, log set repositioning, and panel swaps are same-visit jobs when the part is on the truck or in local stock. Liner replacements and conversions are scheduled as a second visit because the scope is larger. Tell us what you’re seeing when you call and we’ll tell you honestly whether it’s a one-day fix.
We use OEM Olympia parts when they’re available and when they’re the right call for the repair. For gaskets, refractory panels, and stainless liners, we often use equivalent or better materials from our DuraFlex, HeatShield, and Gelco inventory. The decision is always written into your quote before work starts, with the reason stated plainly. You’re never receiving a mystery part installed at a mystery price.
Once a year if you burn regularly, and every two years if you burn occasionally. The Fairfax climate means humidity in the summer and freeze-thaw cycles in the winter, which put extra stress on chase flashing, gaskets, and refractory panels. A yearly camera scan catches micro-cracks before they become firebox repairs. We include a documented photo record on every visit so you can see the same images our tech saw.
We won’t work on an Olympia fireplace we haven’t camera-scanned first. Cleaning without inspecting means we could be sweeping a flue that has a cracked liner or a warped damper, which wastes your money and leaves the real problem in place. Level 2 camera inspection is included on every visit, and you get the photos. Call (571) 443-8256 for a written estimate.
Get Your Olympia Fireplace Serviced in Fairfax
If you’ve got an Olympia fireplace or insert in Fairfax that’s not performing the way it used to, call (571) 443-8256. We’ll answer live, schedule a visit, run the camera, and hand you a written price before anyone starts. No pressure, no vague quotes, no work you didn’t approve in writing. Just the camera, the measurement, and the number.
Written by Corrine Halstead, Owner, Level Two Chimney Fairfax at Level Two Chimney Fairfax, serving Fairfax and nearby areas.