Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Tysons Corner, VA
Chimney cap and crown work in Tysons Corner is driven by one fact: the 1970s and 1980s townhome rows along Route 7 and Route 123 were built with factory-made metal fireplaces never meant to last 45 years, and Northern Virginia’s 20 to 30 freeze-thaw cycles each winter crack the masonry crowns that sit exposed on top of them. Most calls we take in this ZIP code are not traditional sweep jobs. They’re water intrusion through failed crowns, rusted chase covers, and refractory panels crumbling inside zero-clearance units. Call (571) 443-8256 and we’ll put a camera down the flue before we quote a dollar.
Why Tysons Corner Homes Are Different
Tysons Corner has two housing stocks that could not be more different. The post-2010 high-rise condos clustered around the Silver Line Metro corridors almost never have wood-burning appliances, which means the chimney work in those buildings is mostly chase cover and venting inspection for gas inserts. But the brick townhome communities hemmed in along Route 7 and Route 123 are a different story entirely. Those factory-built zero-clearance fireplaces are now 40 to 50 years old, well past their 20 to 25 year design life. We regularly find refractory panels that have crumbled to dust, warped doors that no longer seal, and chase covers rusted through from standing water.
The climate compounds it. Humid summers encourage moss and algae growth on exposed crowns, and icy winters freeze the water that has soaked into hairline cracks, wedging them wider every season. In the older rows, flues are often stacked or share a common chase between units, so a blockage in one home is a smoke and fire risk for the neighbor attached to it. That point matters to HOA boards, and it’s why multi-unit inspection contracts are common here.
Our Main Tysons Corner Services
These are the three jobs Tysons Corner homeowners call us about most, each with its own dedicated page for this area.
Chimney Cleaning & Sweep in Tysons Corner
Even in homes with prefabricated fireplaces, the flue still needs annual attention. Creosote accumulates in metal flues faster than in masonry ones because the smaller diameter runs cooler. We sweep mechanically with poly brushes sized to the flue, never wire on metal liners. Every visit includes a Level 2 camera scan with a documented photo record, written price before work starts. Full details on Chimney Cleaning & Sweep in Tysons Corner.
Chimney Repair in Tysons Corner
Repair in Tysons Corner usually means firebox and refractory panel replacement on aging zero-clearance units, or masonry repointing on the genuine brick chimneys that survive in the older townhome rows. We document every repair with before-and-after photos and a written warranty. Cracked panels are a fire risk because heat reaches combustible framing. Specifics on Chimney Repair in Tysons Corner.
Fireplace Services in Tysons Corner
Gas inserts, glass door replacement, damper repair, and full fireplace refurbishment are common here because so many post-2010 condos have gas fireplaces that were installed during the redevelopment boom. We service and inspect those units under the same camera-scan standard as wood-burning systems. What to expect, including pricing, is covered on Fireplace Services in Tysons Corner.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in Tysons Corner
Your crown is the concrete slab that caps the chimney and sheds water away from the flue. In Tysons Corner’s older townhome rows, crowned failures are the single most common entry point for the water that ruins refractory panels, rusts dampers, and causes stained ceilings below. The freeze-thaw cycle here works on crowns relentlessly: a hairline crack lets water in, the water freezes in winter and expands, and the crack widens every year until the crown looks like a cracked sidewalk. Chimney caps are the first line of defense for the flue itself, keeping rain, leaves, and animals out of a chase that may be shared with an attached neighbor. We install and repair both under the same documentation standard as every job: written scope, written price, photo record after. Learn more on our Chimney Cap & Crown hub.
Cap Installation
Signs you need it
Water streaking down the flue tiles, birds or debris inside the firebox, or a rusted-out chase cover on a prefab unit.
What it costs in Tysons Corner
Cap installation in Tysons Corner typically runs $250 to $450 for a standard stainless cap on a single flue.
How we do it
We measure the flue opening, install a properly sized stainless or copper cap with a screened spark arrestor, and seal the base to the crown.
Crown Repair
Signs you need it
Cracks in the concrete crown, spalling chunks missing from the edges, or efflorescence stains running down the brick face.
What it costs in Tysons Corner
Crown repair here ranges from $350 to $800 depending on whether we patch and seal or rebuild the crown entirely.
How we do it
We remove loose material, build or patch the crown with the proper slope away from the flue, and apply a waterproof sealant.
What Chimney Cap & Crown Costs in Tysons Corner
| Item | Typical range in Tysons Corner |
|---|---|
| Cap installation (single flue) | $250 - $450 |
| Crown repair (patch and seal) | $350 - $800 |
| Cap replacement | $250 - $450 |
Does a cracked crown really need to be fixed right away?
Yes. Every winter the crack gets wider as water freezes and expands. A crown left unrepaired becomes a tear-down inside a few seasons in this climate.
Can I just put a cap on and skip crown repair?
A cap keeps rain out of the flue but does nothing for water entering through crown cracks. Both need to be addressed for full protection.
Chimney Liner & Rebuild in Tysons Corner
Liners in the pre-redevelopment Tysons Corner townhome stock are a known failure point. Original clay tile liners crack under decades of freeze-thaw stress, and the metal factory flues in zero-clearance fireplaces corrode from acidic creosote. A damaged liner allows heat and carbon monoxide to reach combustible framing, which is why we camera-scan every single job before quoting. The stacked flues common in attached rows make a liner breach in one unit a shared-wall hazard for the neighbor on the other side. Details on our Chimney Liner & Rebuild hub.
Liner Replacement
Signs you need it
Crumbling clay tile shards in the firebox, visible gaps between liner sections on the camera, or draft problems that won’t resolve with cleaning.
What it costs in Tysons Corner
Liner replacement in Tysons Corner typically runs $1,800 to $3,200 for a stainless steel liner in a standard single-story flue.
How we do it
We measure the flue, recommend the right diameter and alloy, and install the new liner with insulation where code requires it, then camera-verify the result.
Partial Rebuild
Signs you need it
Spalling brick, a leaning chimney stack, or mortar joints that have turned to sand in the upper courses.
What it costs in Tysons Corner
Partial rebuild in this area runs $1,200 to $3,000 depending on how many courses of brick have to come down and go back up.
How we do it
We tear down the damaged upper section, re-lay brick with fresh mortar matched to the original, and install a new crown and cap.
What Chimney Liner & Rebuild Costs in Tysons Corner
| Item | Typical range in Tysons Corner |
|---|---|
| Stainless steel liner | $1,800 - $3,200 |
| Partial rebuild | $1,200 - $3,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Do I really need a new liner?
Only if the camera shows cracked tile, rust-through, or a gap that lets heat reach framing. We will show you the footage before you spend.
How long does a stainless liner last?
Twenty to thirty years if installed correctly and inspected annually. The warranty we provide is written before work begins.
Brands We Service in Tysons Corner
We install and stand behind Famco caps, Copperfield dampers, DuraFlex liners, and HeatShield resurfacing. Parts for common Tysons Corner townhome configurations are stocked locally, which means most liner and cap jobs can be scheduled within a week. See our brands for full material specs.
Pricing for Chimney Cleaning in Tysons Corner, VA
| Service | Typical range in Tysons Corner |
|---|---|
| Chimney sweep (standard) | $180 - $340 |
| Cap installation | $250 - $450 |
| Cap replacement | $250 - $450 |
| Crown repair | $350 - $800 |
| Stainless steel liner | $1,800 - $3,200 |
| Partial rebuild | $1,200 - $3,000 |
| Full chimney rebuild | $8,000 - $15,000 |
| Level 2 camera inspection | Included with every job |
What pushes price up in Tysons Corner is access: some roof pitches on the older townhome rows require safety rigging, and shared chases can complicate liner pulls. Every quote is written before work starts, with a written scope and a written warranty, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Tysons Corner
We work throughout Tysons Corner and the surrounding ZIP codes, including the townhome rows along Route 7 and Route 123 and the condo buildings near the Silver Line stations. Typical scheduling lead time is two to five business days.
- Old Meadow
- Westwood Village
- Rotonda
- Evans Farm
- Pimmit Hills
Service Area - Cities Near Tysons Corner
We also serve the surrounding Northern Virginia communities from our metro-office scheduling base in Washington, DC. If you’re in Fairfax, VA, Vienna, VA, Reston, VA, or Falls Church, VA, you’re in our daily routing area.
Serving Tysons Corner, VA - Our Local Coverage Area
We’re based in the Tysons Corner area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Tysons Corner
Most appointments are scheduled within two to five business days. We text you when the technician is on the way, and the assigned tech’s name and license number are on the booking confirmation.
Many townhome HOAs in this area require written approval before exterior work like caps or rebuilds, and some board agreements cover shared chase maintenance. We provide written scope documents that satisfy most HOA review requirements.
A written scope of work, the price you approved, before-and-after camera footage of the flue, and a written warranty. Clause 4 of the Haven Standard requires the photo record on every job. Call (571) 443-8256 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tysons Corner Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.