A Level company - serving Fairfax, VA

Famco Crown Repair Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Famco Crown Repair: The Fairfax Owner’s Guide

We stock and install Famco-compatible chimney crown repair components across Fairfax, with most complete crown repairs running between $400 and $900 installed depending on crown size and flue configuration. We carry Famco crown kits on our trucks, which means most Fairfax homes get the repair done in a single visit once we have the measurements from your camera inspection. The way owners usually find us is not subtle: water staining on the ceiling near the chimney, a flaking crown visible from the yard, or a damp smell in the firebox after rain.

Call (571) 443-8256

The crown is the concrete or mortar slab that sits on top of the chimney and sheds water away from the flue. On Famco-installed caps and crowns across Fairfax, the first failure point is almost always the bond between the crown and the flue tile, not the Famco cap itself. Water gets in, freezes, and spalls the crown edge. By the time you can see it from the ground, it has been failing for a season or two.

Which Famco Models This Applies To

Famco makes the crown-mount caps, dampers, and crown kits that sit on top of the masonry crown. The repair work we do covers the crown itself plus the Famco component that mounts to it. This includes the Famco top-mount damper series, the standard and oversize crown caps, and the multi-flue crown assemblies. If you have a Famco cap that is rusted at the base ring or a damper that will not seat flush, the crown underneath is usually the real problem.

There is a compatibility gotcha worth knowing: Famco multi-flue caps will not fit a crown that has shifted even a quarter inch out of plane. We have had customers in Fairfax buy a replacement Famco cap themselves, only to find it will not seat because the crown has dipped on one side. The identifier that matters is not the cap model number stamped on the aluminum. It is the crown’s outside dimensions, flue tile projection height, and whether the crown has a reinforced bond break or none. We build or repair the crown to accept the Famco part you have, rather than asking you to replace both.

We are an independent chimney service company in Fairfax, not affiliated with Famco. We stock Famco components because they are what many of our customers already have on their chimney, and we match them to the crown work rather than pushing a full cap replacement.

Signs Your Famco Crown Repair Is Failing

Professional technician repairing cracks in a brick chimney crown with mortar.
Signs Your Famco Crown Repair Is Failing
  • Flaking or spalling along the crown edge. Water has saturated the crown’s top layer, frozen during a Fairfax winter night, and popped the surface. What looks like cosmetic wear is structural loss.
  • A rust halo around the base of the Famco cap. The cap itself may be fine. The rust is coming from the steel fasteners or the cap’s base ring reacting with standing water that no longer drains off the crown.
  • Hairline cracks radiating from the flue tile. This is the classic bond failure. The flue expands at a different rate than the surrounding crown, and hairline cracks widen every season until water moves through them freely.
  • Efflorescence or white staining down the chimney brick below the crown. Water is moving through the crown and carrying dissolved salts out through the masonry face. If the brick below the crown is white while the rest of the chimney is not, the crown is the source.
  • Water in the firebox after a heavy Fairfax thunderstorm. Not always the crown. But when the crown is failed, rain pools on it, runs down the flue tile exterior, and presents as dampness at the smoke shelf or firebox floor within hours.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

A full Famco-compatible crown repair in Fairfax typically runs $400 to $900 installed, with the range driven by crown size, number of flues, and whether we are doing a full crown replacement or a repair-and-reseal. A simple single-flue crown with sound structure but failed sealant is at the low end. A two- or three-flue crown that requires formwork, a bond break, and new crown material is at the high end.

Your written quote shows the line items: material, labor, disposal, and the specific Famco component we are reusing or replacing. It does not change at the door. That is Clause 1 of the Haven Standard, and it has been our practice in Fairfax since 2009. The work carries our 365-Day Done Right Promise: if it is not done right, we make it right.

Every crown repair includes the camera inspection before the quote and a photo record when the job is done. Corrine Halstead’s crew does not hand you a receipt and wave. You get images of the crown before, during, and after, plus the written scope and written warranty. Clause 4 of the Haven Standard has required that photo record on every job since 2009, long before insurers in Virginia started asking for it.

DIY or Call Us?

Professional technician performing residential chimney cleaning and sweeping service
DIY or Call Us?

You can safely inspect your own crown from the ground with binoculars or from a ladder if you are comfortable on one. Look for the symptoms above and take photos. What you should not do is climb onto the crown with a bucket of sealant and a trowel. A failed crown is not a surface reseal job. If water has penetrated the crown body, a smear of caulk traps the moisture inside, where freeze-thaw keeps working through Fairfax winters until the crown edge breaks away entirely.

Roof-level chimney work is also a fall risk, and a crown that looks walkable from the ground may be structurally compromised. We do not recommend any homeowner go up there without fall protection. If you are not sure whether your crown needs a reseal or a full rebuild, call us at (571) 443-8256. We will put a camera on it, send you the photos, and give you a written price either way. If the crown can wait, we will say so plainly.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Get a Written Price for Your Famco Crown Repair in Fairfax

Professional performing chimney cap repair with an angle grinder
Get a Written Price for Your Famco Crown Repair in Fairfax

Call us at (571) 443-8256. You will get a live person, a scheduled visit, a camera inspection, and a written price before anything gets started. If you have a written quote from another company, bring it. We offer a free second opinion on any written estimate, and we will go over it line by line with the camera footage in front of you. Before that, no salesman in your living room. Just the chimney, the camera, and the number on paper.

Written by Corrine Halstead, Owner, Level Two Chimney Fairfax at Level Two Chimney Fairfax, serving Fairfax and nearby areas.

Need Chimney Cleaning help in Fairfax? Licensed & insured · Written inspection reports response · free estimates
Call (571) 443-8256
Local Service Coverage

Request a Free Estimate in Fairfax

Tell us what you need - Level Two Chimney Fairfax responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to being contacted by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch